Lenticulars, also known as linear lens arrays or cylindrical lens arrays, have linear structures, where every groove is the same and each groove has a small radius of curvature, thus creating multiple line images. These components can also be used as diffuse or spread light in a single direction.
Designs Available for Manufacture All dimensions in mm
|
Part Number |
Radius of Curvature |
Facet Spacing |
Clear Aperture |
Lens Length |
|
LN611 |
0.157 |
0.187 |
100 x 100 |
100 |
|
LN615 |
0.432 |
0.798 |
89Ø |
NA |
|
LN629 |
0.483 |
0.381 |
114 x 114 |
114 |
|
LN663 |
0.544 |
0.508 |
400 x 500 |
500 |
|
LN692 |
0.762 |
0.162 |
178 x 229 |
178 |
|
LN636 |
0.762 |
0.186 |
260 x 260 |
260 |
|
LN669 |
0.762 |
0.368 |
260 x 260 |
260 |
|
LN684 |
1.000 |
0.400 |
279 x 279 |
279 |
|
LN618 |
1.720 |
0.162 |
139 x 222 |
222 |
|
LN665 |
3.175 |
2.794 |
120 x 175 |
175 |
Notes:
- Standard material used is PMMA. Other materials are available.
- Standard part thickness = 2mm. Other thicknesses possible.
- Outside diameter/size may be up to 5-20 mm beyond clear aperture. Other dimensions or special trimmings possible upon request.
- Special designs possible upon request.
- Radius and Facet Spacing values are reported for tooling. Actual parts will shrink depending on material and process (typical shrink ratio for acrylic is 0.45%).
- All specifications are subject to change without prior notice.
